Motec Display Creator User Manual download pdf (Page 65)

Configure Device 65

Project Validation

A display configuration cannot be sent to the device if it is not valid, for this reason, check the validation before

sending.

Use the Device > Validate Project... menu to validate the project configuration.

If the validation fails, the issues that caused failure are listed in the Project Validation Messages pane. Resolve

the issues and try again.

Configure Device

Use Device > Configure Device... menu or the Configure Device button. A list of possible devices

displays; select the appropriate device to send the configuration to, and select the Send button.

☛

• Sending a configuration will automatically save the project.

• A display configuration cannot be sent if it is not valid. If an attempt is made to send the configuration

and it fails due to validation problems, the issues that caused the failure are listed in the Project

Validation Messages pane. Resolve the issues and try again.

1 2 ... 60 61 62 63 64 65 66

No comments

Motec Display Creator User Manual Page 65