Motec PDM30 User Manual download pdf (Page 30)

MoTeC Operation 27

Operation

CAUTION: The PDM may get very hot, do not touch the PDM during

operation.

To perform any of the activities in the Online menu, the PC needs to

communicate with the PDM.

When a configuration file is open in PDM Manager, it will connect to the PDM

with the matching serial number.

If there is no file open, all connected PDMs will be displayed. PDM Manager

can be connected to a selected PDM.

CAN Bus Bitrate

The PDM can be configured to operate at CAN bit rates of 250Kbps, 500Kbps

or 1Mbps.

PDM manager includes a CAN bitrate conversion tool in the Tools > Options >

Communications menu. This tool configures the CAN bitrate and restarts the

PDM at the new rate.

Note: During the conversion process, all CAN devices must be removed from

the CAN bus except for the PDM and the UTC.

PDM Manager must be configured (in the Tools>Options>Communications

menu) to match the PDM CAN bit rate.

Sending and Retrieving Configuration Files

 On the Online menu, click Send Configuration to send the currently

open configuration file to the connected PDM

 On the Online menu, click Get Configuration to retrieve the current

configuration file in the connected PDM

Checking Operation

Monitor Channels

 On the Online menu, click Monitor Channels

Monitor Channels shows the value of each channel in the original tree

structure.

Monitor PDM

 On the Online menu, click Monitor PDM

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 60 61

No comments

Motec PDM30 User Manual Page 30