Motec GPS-L10 User Manual download pdf (Page 8)

6 Specifications

Specifications

Electrical

Power Supply Voltage 4.0 to 6.0 V

Power Supply Current 38 mA Typical

Connections

Mating Connector Deutsch DTM06-4S

Pin Name Description

1 Bat - Connect to Battery Negative on the logging device

2 TX Connect to RX pin on logging device

3 RX Don't connect (this pin is only used for programming)

4 5V Connect to 5 V sensor supply on the logging device

Data

Output Type RS232

Output Levels -5 V / 5 V (nominal)

Baud Rate GPS-L5 19200 (MoTeC default)

Baud Rate GPS-L10 38400 (MoTeC default)

NMEA Sentences RMC, GGA (MoTeC default)

Physical

Antenna Built into GPS unit

Size 48 mm x 41 mm x 14 mm (1.9" x 1.6 x 0.55")

Weight 106 g (3.8 oz)

Cable length 3 m (10 ft)

Operating Temp -30 °C to +80 °C (-22 F to 176 F)

Mounting Magnetic base

GPS Performance

Update Rate 5 Hz (GPS-L5), 10 Hz (GPS-L10)

Satellite Channels 66

Reacquisition Time < 1 sec

Hot Start Time 2 seconds

Warm Start Time 33 seconds

Cold Start Time 35 seconds

Dynamics 4G

1 2 3 4 5 6 7 8

No comments

Motec GPS-L10 User Manual Page 8