Motec GPS-L10 User Manual download pdf (Page 5)

MoTeC Using the GPS 3

Software Version

The MoTeC device must be running the following software version (or higher)

SDL3 Version 2.2 or higher

ADL3 Version 5.2 or higher

ACL Version 1.1 or higher

M84 Version 1.10K2 or higher

M400/M600/M800/M880 Version 3.51U2 or higher

M84/M400/M600/M800/M880 ECU Setup

Ensure you are using the GPS-L5 unit. In the relevant MoTeC ECU Manager

software on the Adjust menu click General

Setup>Communications>RS232 Telemetry Setup

o Enter Telemetry Baud Rate 19201

o Enter Telemetry Data Set 0 to turn the dataset Off

The M84 and 'Hundred Series' ECUs only process channels with 16 bit

resolution. While logging, the 32 bit channels Time, Longitude and Latitude

will be split into two 16 bit values. When viewing the data, using i2 data

analysis software, the original 32 bit values will be reassembled.

ECU Data Logging Setup

In the relevant MoTeC ECU Manager software on the Adjust menu click

General Setup>Data Logging Setup>GPS

o Enter GPS Latitude HW 10

o Enter GPS Latitude LW 10

o Enter GPS Longitude HW 10

o Enter GPS Longitude LW 10

o Enter GPS Speed 10.

1 2 3 4 5 6 7 8

No comments

Motec GPS-L10 User Manual Page 5