Motec E816 User Manual download pdf (Page 3)

MoTeC Introduction 1

Introduction

This manual describes the functions and specifications of the E888/E816

expander modules and their configuration for use with a MoTeC ADL. These

devices offer additional inputs and outputs into the ADL via a CAN connection.

ECU Manager software is currently being developed that will allow the M800

family of ECUs to read information from the E888/816.

This manual includes information on connecting a single expander unit to an

ADL or ADL2. The ADL2 along with the ADL2 Dash Manager software has

been designed to easily allow the connection of a second expander.

It is possible to connect a second expander unit to an ADL and a third or even

fourth unit to an ADL2 – please contact your MoTeC dealer for details in these

situations.

The SDL is capable of reading data from 8 thermocouples when connected to

an E888. It cannot read analog voltage inputs.

1 2 3 4 5 6 7 8 ... 29 30

No comments

Motec E816 User Manual Page 3